From: Unknown User

Hi,

I have tried to install ERP5 on my local machine which has CentOS 6. I have trying to create a new ERP site using the instructions given in http://en.wikibooks.org/wiki/ERP5_Handbook/Lets_go...  but I have not been successful in creating the same. 

Is it really required to create a SlapOS node and then install ERP5 on top of it, to make it work?

Please advise.

Regards

Sachin

Hello,

Yes, it is strongly advised to use SlapOS to deploy any ERP5 nowadays.

Could you describe your problem?

Regards,

Cedric 

I might be asking some basic questions but I am not able to understand the reason of linking SlapOS to ERP5. As per your site "SlapOS is a decentralized Cloud Computing technology. It can automate the deployment and configuration of applications in a heterogeneous environment.". 

What if I have a company who does not require a cloud computing solution?  

The error which I am getting is as follows -

Site Error

An error was encountered while publishing this resource.

Error Type: BrokenModified
Error Value: Can't change broken objects

---

Troubleshooting Suggestions

• The URL may be incorrect.
• The parameters passed to this resource may be incorrect.
• A resource that this resource relies on may be encountering an error.

For more detailed information about the error, please refer to the error log.

If the error persists please contact the site maintainer. Thank you for your patience.

Thanks for the response and I have two queries on this response. I would appreciate if you can answer both of them. 

1) Does this mean that SlapOS is the only way to install the ERP5 system and are you indicating that I am not allowed to install it through RPM. If that is the decision, then, I will definitely again try to install it through SlapOS. Please advise. If installing through RPM is allowed then , I would like some guidance on overcoming the error which I have faced earlier

2) Also, if I have to install ERP5 using SlapOS, is there a document which you can share which indicates the steps to install ERP5 after installing SlapOS node. I have seen a document which tells about installing the SlapOS node at  http://community.slapos.org/wiki/developer-Installing.SlapOS.Package  but that does not tell me the method of installing ERP5

From: Klaus Wölfel

From: Unknown User

Thanks for the response and I have two queries on this response. I would appreciate if you can answer both of them. 

1) Does this mean that SlapOS is the only way to install the ERP5 system and are you indicating that I am not allowed to install it through RPM. If that is the decision, then, I will definitely again try to install it through SlapOS. Please advise. If installing through RPM is allowed then , I would like some guidance on overcoming the error which I have faced earlier

2) Also, if I have to install ERP5 using SlapOS, is there a document which you can share which indicates the steps to install ERP5 after installing SlapOS node. I have seen a document which tells about installing the SlapOS node at  http://community.slapos.org/wiki/developer-Installing.SlapOS.Package  but that does not tell me the method of installing ERP5

Hi,

1) Since ERP5 is entierly open source, you are of course allowed to install and us it how ever you wish as long as you respect the GPL. On the other hand, we can only help you, if you use the same methods as we use: Virtual Machine or SlapOs.2) You can use this document

 2) To install the software release, you can use the tutorial developer-Installing.KVM.Software.Release and select "ERP5" Version "slapos-0.117" instead of KVM. It will take several hours to compile. After you installed it, you have to make sure that you are logged in in ERP5 SlapOS, then you use the link on https://www.slapos.org/service-shortcut/erp5 to install the ERP5 Instance. If you are logged in in slapos, slapos will automatically find your computer where you installed the software release "ERP5 slapos-0.117"and install the software instance.

Kind Regards,

 Klaus Wölfel

Hi,

I was trying to install SlapOS node and I get the following error when I run slapos-test to check the configuration

Checking slapos-node cron file: - ERROR - Your line for 'slapos node report' command does not seem right
Checking slapos-node cron file: - ERROR - Your line for 'slapos node instance' command does not seem right
Checking slapos-node cron file: - ERROR - Your line for 'slapos node software' command does not seem right
Checking slapos-node cron file: - ERROR - Your line for 'slapos node format' command does not seem right

Can you please tell me the reason for the same?

Regards

Sachin

Hello,

The contents are given below

---------------------------------------------------------------------------------------------------------------------------------

SHELL=/bin/sh
PATH=/usr/bin:/usr/sbin:/sbin:/bin
MAILTO=""

# Run "Installation/Destruction of Software Releases" and "Deploy/Start/Stop Partitions" once per minute
* * * * * root /opt/slapos/bin/slapos node software --verbose --logfile=/opt/slapos/log/slapos-node-software.log > /dev/null 2>&1
* * * * * root /opt/slapos/bin/slapos node instance --verbose --logfile=/opt/slapos/log/slapos-node-instance.log > /dev/null 2>&1

# Run "Destroy Partitions to be destroyed" once per hour
0 * * * * root /opt/slapos/bin/slapos node report --maximal_delay=3600 --verbose --logfile=/opt/slapos/log/slapos-node-report.log > /dev/null 2>&1

# Run "Check/add IPs and so on" once per hour
0 * * * * root /opt/slapos/bin/slapos node format >> /opt/slapos/log/slapos-node-format.log 2>&1

# Make sure we have only good network routes if we use VPN
* * * * * root if [ -f /etc/opt/slapos/openvpn-needed  ]; then ifconfig tapVPN | grep "Scope:Global" > /dev/null ;if [ $? = 0 ]; then ROUTES=$(ip -6 r l | grep default | awk '{print $5}'); for GW in $ROUTES ; do if [ ! $GW = tapVPN ]; then /sbin/ip -6 route del default dev $GW > /dev/null 2>&1;fi ;done ;fi ;fi
~                                      

From: Unknown User

Hello - Please find the details below

------------------------------------------------------------------------------------------------------------------

SHELL=/bin/sh
PATH=/usr/bin:/usr/sbin:/sbin:/bin
MAILTO=""

# Run "Installation/Destruction of Software Releases" and "Deploy/Start/Stop Partitions" once per minute
* * * * * root /opt/slapos/bin/slapos node software --verbose --logfile=/opt/slapos/log/slapos-node-software.log > /dev/null 2>&1
* * * * * root /opt/slapos/bin/slapos node instance --verbose --logfile=/opt/slapos/log/slapos-node-instance.log > /dev/null 2>&1

# Run "Destroy Partitions to be destroyed" once per hour
0 * * * * root /opt/slapos/bin/slapos node report --maximal_delay=3600 --verbose --logfile=/opt/slapos/log/slapos-node-report.log > /dev/null 2>&1

# Run "Check/add IPs and so on" once per hour
0 * * * * root /opt/slapos/bin/slapos node format >> /opt/slapos/log/slapos-node-format.log 2>&1


# Make sure we have only good network routes if we use VPN
* * * * * root if [ -f /etc/opt/slapos/openvpn-needed  ]; then ifconfig tapVPN | grep "Scope:Global" > /dev/null ;if [ $? = 0 ]; then ROUTES=$(ip -6 r l | grep default | awk '{print $5}'); for GW in $ROUTES ; do if [ ! $GW = tapVPN ]; then /sbin/ip -6 route del default dev $GW > /dev/null 2>&1;fi ;done ;fi ;fi
~                             

Everything seems to be okay.

Indeed, after a change in the configuration, even in latest version, the slapos-test tool is not able to find that this is okay. So just ignore those 4 lines of error.

I'll update this tool now in the development version.